Video: GreenHulk Garage Shows How to Check and Set Sea-Doo 300 Supercharger Slip

Some maintenance jobs sound considerably more complicated than they actually are, especially when superchargers are involved. But as Greg from GreenHulk Garage demonstrates in one of his September videos, checking and adjusting the slip on a Sea-Doo 300 supercharger can be a fairly straightforward process with the right tools and a little patience.

In the video, Greg walks viewers through the procedure using a freshly rebuilt supercharger, explaining the tools required, how to measure slip accurately and how to make adjustments without overshooting the desired setting.

The job requires two specialty tools — a gear holder and a shaft holder — along with 17 mm and 18 mm sockets and wrenches, including a thin 18 mm wrench, and a digital torque wrench.

That last tool is particularly important. Greg explains that measuring slip requires reading the continuous torque while the clutch is slipping, rather than the peak torque indicated by a conventional click-style torque wrench.

After rotating the shaft several times to warm the clutch washers, Greg checks the existing slip, finds it below his desired setting and demonstrates how to increase it by tightening the adjustment nut in small increments.

He also points out that there is no single slip setting appropriate for every application. The correct target depends on several factors, including whether the watercraft is stock or modified and whether the supercharger uses OEM or aftermarket components.

Once the desired setting is reached, Greg installs and torques the locknut, then checks the slip again. That’s an important final step because tightening the locknut can change the slip measurement.

The video also prompted an interesting exchange in the comments when a viewer reported being told by a dealership that Sea-Doo 300 superchargers were disposable units with no replacement parts available.

Greg disagreed, explaining that he rebuilds these superchargers regularly and pointing the viewer toward an available rebuild kit.

For owners who would rather leave the work to someone with the appropriate equipment and experience, Greg also offers a supercharger slip-setting service.

As usual, GreenHulk Garage keeps the presentation casual while delivering practical, detailed information for riders who prefer to understand what’s happening inside their machines.

Watch the full video below to see Greg demonstrate the process from start to finish.

Jessica Waters
Jessica Waters
Editor – [email protected] Currently the Managing Editor of the Dalton Daily Citizen in Northwest Georgia, Jessica Waters is a photojournalist and reporter who has covered competition stock car racing, downhill skiing, motocross, horse racing and hydroplane races for more than 30 years, and added jet ski races and freestyle competitions in 2010, covering many competitions for local and national media outlets.

Related Posts

LEAVE A REPLY

Please enter your comment!
Please enter your name here
Captcha verification failed!
CAPTCHA user score failed. Please contact us!