Home Blog Page 428

Pitch Perfect: 2014 Kawasaki Ultra 310R JetSki

4

2014 marks the 40th anniversary of Kawasaki’s JetSki. The 310R comes after years of consumer input and is designed for those offshore and endurance riders.

Decades ago, celebrating in the end zone wasn’t an illegal offense. Players crossing that final yard line regularly danced, gyrated and cartwheeled in elation before their felled opponents. Today, a whole generation of football players and fans have been raised thinking that such behavior is the height of bad sportsmanship. So when Kawasaki announced the arriving Ultra 300X’s output had increased to 310, many considered it akin to spiking the football.

Kawasaki already led the industry with a significant gap in horsepower over its competition. With nearly 80-horsepower over Yamaha and 40-plus over Sea-Doo, the Big K really didn’t have much to worry about in the “numbers race.”

Moreover, the podiums of every single offshore championship featured nothing but Ultra 300Xs in 2013. Even last year’s Pro Stock Runabout class champion of the UWP-IJSBA Watercross Tour was a 300X, besting both Sea-Doo and Yamaha’s close course darlings.

The previous iterations of the Ultra were all stepping stones to the 310. For those willing to look, the modifications made to this year’s Ultra are the result of countless hours of polishing.
A fantastically easy-to-navigate LCD instrumentation allows you to shuffle through a fuel consumption calculator, external water/air temp gauge, clock, trip and hour meters, and max speed functions, in addition to a revised boost gauge and riding mode goggles.

Building off of the renowned Ultra platform – first introduced (in this form) in 2007 as the 250X and the later-redesigned 300X in 2011 – the 310 series benefits from nearly a decade of race course dominance, as well as consumer class leading stability, storage and thrilling performance. That’s quite the résumé. So why wouldn’t Kawasaki leave well enough alone and refocus its efforts on something else?

Let me begin by saying that the extra 10-horsepower was a byproduct. “Gaining more horsepower was never the goal,” Kawasaki’s Bret Snider explained. “We managed to free up the extra power by making major improvements in the engine’s efficiency.”

The narrow-contoured Sportseat is wrapped in grippy textured canvas for improved traction. The seat is supple and supportive and is a marked improvement. We noted the rear passenger strap ends with two flaps on either side covering a sharp-edged plastic fastener. These flaps need to be sown down to keep from scraping uncovered legs.
Externally, the changes of the 310R over the rest of the Ultra lineup are visible, but again, only if you’re looking for them (like this custom diamond patterned Hydro-Turf traction mat). Internally, it’s a different ball game.

The 1,498cc, liquid-cooled inline four-cylinder plant spins out an industry-leading 310-horsepower thanks to drastically improving engine oiling, reducing heat soak and maintaining constant lower internal engine temperatures throughout the engine’s linear powerband. This was first achieved by re-engineering the crankcase with thicker water jackets, larger oiling passages for quicker oil return to the redesigned baffled pan that reduces oil windage and sloshing, and dual under-piston cooling oil jets (increased from one jet per piston to two).

Speaking of the pistons, the new Ultra 310 gets new lightweight cast slugs featuring additional ring land V-grooves.

In the turns, the Ultra 310R’s steering response is immediate. The hull reacts deftly to the tiller; the low, wide bars of the 310R aptly communicating the rider’s immediate commands.
The Ultra 310R still touts some of the most voluminous storage (56 gallons worth).

Kawasaki bumped up to a larger capacity fuel pump for improved fuel flow volume and 500cc injectors spraying into a brand-new long-runner intake manifold. Made from heat-resistant plastic, the intake radically improves low-to-mid range power.

Fed by the same Eaton TVS constant-displacement, four-lobe supercharger as last year, the Ultra touts dual blow-off valves to siphon off any extra of its 17psi of boost when needed. The previous model’s liquid-cooled intercooler returns as well. But what isn’t mentioned is the return of the second waterbox. The original 250X touted dual waterboxes but was reduced to one for the 260X and 300X. The second muffler not only drops the decibel output, but also addresses the previous Ultra’s troublesome low speed list while turning.

In fact, much of the aforementioned improvements came after studiously addressing consumers’ and technicians’ most reported issues with prior models.

The biggest distinguishing feature of the 310R over the rest of the Ultra lineup are the electro-coated stainless steering neck and MX-style bars. Even with the sturdy steering neck replacing the plastic tilt steering, we noted a little play that could benefit from shimming up.
The 310R is surprisingly unchanged from its siblings. Rather, Kawasaki opted to leave well enough alone, as in its current form, the setup of 310R is nearly perfect for most offshore riders (as it was this group the limited-run 310R was targeted for).

Overheating, burning and scavenging for oil, and even fuel over-consumption were mitigated with the above revisions. Even the large oil breather/catch can and articulated sprung belt tensioner are OE-level solutions first developed by the aftermarket. The large 160mm 8-vane pump also benefits from a repitched 3-blade, long-snout prop – also very similar to what tuners and racers use.

But all of these improvements are found across all of the 310 models, X, X SE, R and LX. What makes the 310R stand out among the rest? Well, if there was ever a personal watercraft that was specifically tailored to fit me – and lot of you who think like me – it would be the 2014 Kawasaki Ultra 310R.

Other changes made to the 310 series from the 300X include a much-needed redesign of the passenger handrail, not only relocating the grip for easier, more ergonomically-friendly handling, but also has been narrowed so it won’t chafe inside of riders’ legs while riding standing up as before. Additionally, the mirrors have been replaced with more convex lenses.
The Ultra series shows how a personal watercraft can be both a apt cruiser as well as an aggressive top performance vehicle. Back in a big way is Kawasaki’s signature Lime Green livery.

It’s everything I would have ever wanted from the previous model – the seemingly unstoppable Ultra 300X. The Ultra 310R is the project ski I didn’t have to build. It’s got 99.9-percent of all the mods I would see myself bolting on a Saturday morning before giving it a right good flogging the next day.

The 310R gains Kawasaki’s new Sportseat, wrapped in grippy textured canvas and a deep-grooved Hydro-Turf traction mat kit. Replacing the plastic tilt steering is a fixed electro-polished stainless steel steering neck and race-grade MX-style handlebars. These of course, can be adjusted fore and aft by loosening the hex head bolts with an Allen wrench.

As always, it’s while in the rough stuff that the Ultra shines.

On the water, the 2014 Ultra 310R pulls with rotator cuff-tearing force. The Lincoln Tunnel-sized pump bites hard and remains loaded even while streaking over 2-to-3 foot Gulf Coastal chop. The fly-by-wire throttle response is immediate, almost precognitive. At speed, the supercharger whistles like a near-passing bullet. There’s no chatter of loose plastic or rattling, proof of superb fit and finish.

I did note some definite reaction lag in the electronically-assisted trim control toggle. Like the Cruise Control button, bumping the trim up or down requires holding down it one or two beats for it to respond – which is difficult to manage while under throttle.

Apart from these little quibbles, the Ultra 310R – and all of the 310-powered Ultras – adds up to quite literally the best runabout that Kawasaki has produced in its 40 years. And Kawasaki’s 310R is the Ultra that guys like you and me have been waiting for.

310R-1 DY5T9326 DY5T9328 DY5T9330 DY5T9337 DY5T9344 DY5T9354 DY5T9357 DY5T9363 DY5T9374 DY5T9378 DY5T9381 DY5T9384 DY5T9387 DY5T9392 DY5T9461 DY5T9519 DY5T9961 DY5T9974 DY5T9978
<
>

Troy Snyder Forgoes Sea-Doo For Yamaha in 2014

0

It was bound to happen, we suppose. Troy Snyder announced on Liquid Speed Radio last night that he will be switching from competing aboard a Sea-Doo RXP-X to racing on a Yamaha FZR SVHO for 2014. The supercharged 1.8L Yamaha will be built by the nearly unstoppable Dean’s Team, who has shown a tremendous affinity for the new SVHO plant.

Snyder beamed on the show, “I’d really like to thank Dean Charrier. He and Scott Watkins are really the guys who put this whole deal together for me.” This of course, ups the ante between the simmering rivalry between he and National Stock Class Champion Eric Francis, who will be piloting a 310-horsepower Ultra 310X for 2014.

Moreover, Snyder states he will abscond with his usual #110 number plate for a more suitable #2, as Snyder earned said ranking in 2013. “Hopefully we will be able to change that to a #1 in the near future,” Snyder said.

Following Snyder across battle lines will be main mechanic, Bo Dupriest. Additionally, sponsors Slippery Wetsuits and RIVA Racing will also continue supporting Snyder’s racing efforts, “RIVA and Dave Bamdas were a big part of my program last year, and he was real excited to hear I made the switch to Yamaha.”

Yet, central to Snyder’s efforts is Tim Judge of Judge Motorsports. Judge will continue to support Synder through this transition. Synder told The Watercraft Journal, “Tim is my mentor, race coach, he’s my on-the-water tuner. He rides all my boats before I go to the line. Tim is a racer himself with multiple world titles. He knows what racers want to feel and how it needs to feel through the power band. He’s a big part of my program.”

Motorcycle & Powersports News Conducts Exclusive Interview With The Watercraft Journal

0

[Editor’s note] I’ll preface this news post by publicly and wholeheartedly thanking one of the most talented, respected and personable powersports journalists in our industry, Jeff Hemmel for reaching out to me to conduct an inside-look at the creation of The Watercraft Journal for the renowned industry trade publication, Motorcycle & Powersports News. To be featured in such a presigious magazine is a very big compliment, and I thank Jeff and the staff of MPN.]

I hope not too sound gaudy writing a news article about an article talking about ourselves, but we were recently the subject of a great interview and introspective feature article on Motorcycle & Powersports News titled, “Industry Vet Launches Personal Content Site & E-Commerce Storefront.” Backtracking from the end of last year’s short-lived “dry run” of an online personal watercraft magazine that has since shuttered up its windows, to the creation of The Watercraft Journal to our plans for the near future, it’s a story that helps clear up a lot and tease the next few months.

I do need to note that as of today, the official launch of www.WatercraftOutfitters.com has been pushed back to March. Getting an e-commerce store up is easy. Getting an e-commerce store up so it works and looks good is entirely different. We only want to provide all of you the best resource we can offer, and that’ll take just a little more time.

In addition to this article, I want to personally thank all of you for your ongoing support in making The Watercraft Journal such an immediate success.

Video: Could Nissan’s 400HP 1.5L 3-Cylinder Hint at Sea-Doo’s Future?

0

Why on earth are we publishing an announcement of Nissan’s new ZEOD RC Le Mans racecar? Trust us, it sounds a little weird to us too. But hear us out. This could seriously change how you look at Sea-Doo…

Nissan designed its futuristic ZEOD RC Le Mans racecar to compete under electric power, but battery life only goes so far these days, so Nissan’s performance branch, NISMO developed a very capable turbocharged, direct-injected 1.5-liter 3-cylinder engine that produces a staggering 400 horsepower.

The gas-powered DIG-T R engine is incredibly compact and lightweight, totaling just 88 pounds – as they point out, the engine could fit inside a carry-on suitcase! According to EngineLabs.com, “Nissan says it will rev to 7,500 rpm and dish out 380 Nm of torque (around 280 lb-ft), which is a comparable power-to-weight ratio as a F1 engine.”

Why we bring this to your attention is to reiterate our previous case that rumors of a four-cylinder Rotax being necessary to bring Sea-Doo back into the fray of competition is not only unfounded, but unnecessary. A three cylinder properly designed and executed is more than capable of leveling the playing field, and we see much of the characteristics necessary to do so in the ACE 900 motor (found in the Spark).

For more on the NISMO-built DIG-T engine, see below:

RaceSki Lightweight, Total-Loss Flywheel For Kawasaki 1100cc SX-R

0

Honed on and proven on the battleground of the UWP-IJSBA Watercross National and CWA Tours as well as the hallowed waters of the IJSBA World Finals, RaceSki’s all-new lightweight total-loss flywheel for the 1100cc Kawasaki race-bred SX-R is finally available for the public.

Weighing in at a svelte 1.9-pounds, the total-loss wheel is possibly the lightest flywheel on the market, and helps to free up horsepower that otherwise would be absorbed by parasitic loss of the reciprocating assembly.

Available exclusively at Optima Racing for $499, if you’re running a full-race setup in your SX-R, RaceSki’s got the answer for you.

Here’s the official release:

Finally after four years of testing on the enduring proving grounds of the IJSBA National Tour, CWA Tour and IJSBA World Finals, the ultimate in lightweight total-loss flywheels for your Kawasaki SX-R 1100 race ski ski available to the public from RaceSki. Weighing in at only 1.9lbs, this is the lightest weight flywheel you can get for your Kawasaki 1100. This is a total loss, non charging flywheel.

2014 Pismo Spring Break Freeride Announced

1

What used to be an annual tradition held the weekend right after the World Finals, the biggest non-event, the Pismo Freeride is happening this upcoming Saturday, March 15, 2014. Titled the “Pismo Spring Break Freeride,” the weekend promises to be a whole lotta fun with plenty of surf riding, some duning, and a whole lot of shenanigans.

Below we’ve included an abbreviated version of the press release including most of the pertinent information you’ll need to attend. But there’s still news unfolding as we near March, so make sure to check in regularly (or just join the group) on the official Facebook page. It’s something every surf rider needs to attend at least once. Heck, you’ll also be able to rub elbows with some of the biggest names in freeride, and that’s always fun.

It’s that time again! As tradition follows we are all going to get together at Pismo Beach for a weekend of good times in the surf! If I left out any details let me know! again I am just trying to get the word out.

What?
2014 Pismo Spring Break Freeride!

Where?
Pismo/ Oceano Dune’s Mile Marker 4!

From 101 Freeway take Grand Ave exit until you cross a set of train tracks that takes you to the beach entrance about 500 feet ahead. Grand Ave has everything from markets, 7-11’s, restaurants, coin washes, banks, gas, and almost everything else you will need on the way in or out of the beach.

Entrances:
The Grand Ave entrance is open from 6am to 11pm. If you arrive or need to leave late the Pier Ave entrance is open 24 hours. Depending on the time of year this entrance is usually the most hard packed. Don’t forget to air down and or bring tow straps!

Camping:
Through www.Reserveamerica.com you can pre order your camping passes for $10 a night. Pre purchasing tickets seem to make it a much more less questions asked entry to the beach for all the gear and shenanigans we tend to bring in the back of our trucks/ trailers.
The location is actually considered the Oceano Dunes. The Direct link to Oceano Dunes reservations for our weekend is here.

Pismo is well known to be blown out. Pismo can also be very nice weather but it never hurts to prepare for cold and heavy winds blowing constantly from 11am to 7pm.

Tents:
• Stake or sand bag em down!
• Dig a burm facing the wind and throw a tarp over the top of your tent anchoring it down with the weight of the sand burm to deflect the wind and morning dew that will soak your tent.

RV’s/Trailers:
• Please keep an eye out on arrival park in a semi circle with other RVS to help block the wind for the party in the center!
• You will make plenty of friends with a place to hang out, shower, or use your bathroom.

• Want to rent an RV? These people deliver on the beach!

Quads/ Sand toys:
• Have legit registration
• Must have a flag whip and helmet to ride around even “in the campsites”
• Pismo Sheriffs are quick to issue and investigate possible DUI’s so have fun but be cautious.
• 15MPH on the sand highway in front of the camp across the whole beach.

What will be going on and who will be there?
• People will be in or out of the water riding the gnarly to mellow Pismo surf. It is quite possible high winds will come through anywhere around 11am-2pm and not lighten up until about 6-8pm. Most people hop on their quads and dirtbikes and demolish the sand dunes 100 yards behind from the campsite.

• There are a few out houses along the campsite other than that bring an RV or make friends with people who have one.

• Please bring firewood to pitch into the community bonfire because Pismo does get pretty dark and chilly at night.

• As the tide comes up move your stuff. It makes us look like weirdos when nobody can drive down the beach. The last thing we want is to draw attention to us (including the rangers) because they have to weave between ski’s and cars parked too low. Try to leave room for 2 rows of traffic to drive through thanks

• MX/quad riders if you guys could help us jetskiiers out by setting up your camps a little further up toward the dunes that would help out a ton. will keep us jetski riders closer to the beach and obviously keep us all closer to what we all like to ride through out the day. We had some issues last year with bikes and quads mixed up in the camp kicking up sand within camp when guys were trying to fix jetski engines & things during the day.

The beach is big enough for the both of us and its going to be a great time for sure! No love lost to our new guests, I just ask on behalf of the jet ski freeride community that we give each other some space this year so people who want to rage heavy through the night (which involved fireworks and cops coming to our area last year) can do so ruthlessly without being in the middle of the freeride party who isn’t quite on that level all together.

What Ever Happened to RIVA Racing’s Camouflaged RXP-X 400 Turbo?

0

If you didn’t see what RIVA Racing unveiled at the official Sea-Doo dealer show last fall, you my friend, are been living under a rock. Shocking the hardcore horsepower crowd, the mad scientists at RIVA pulled the shroud off of an insane 400-horsepower, turbocharged Sea-Doo RXP-X.

The trick RXP-X came wrapped in a slick camouflaged livery but that was only the beginning.

While we couldn’t find the official list of go-fast goodies on this unit, we’re pretty sure the the turbo 400 is using the proven RIVA Racing Stage IV kit with a new modifications.

Enhancing the ski’s already-stellar handling are a set of adjustable Pro-Series Sponsons, RIVA’s billet fixed trim tabs, Pro-Series Steering System, Billet iControl Lever Set and iControl Handlebars, some pretty cool custom traction mats.

Tucked beneath the Jettrim custom seat cover (and sitting alongside the ski on display in the above image), we spotted a billet Wilson/RIVA intake manifold, blow off valve kitGEN-3 Power CoolerPro-Series Fuel Injector Kit, RIVA’s Pro-Series Water Box and exhaust tube kit, and what we can expect to be RIVA’s Athena iControl ECU.

Squeezing out an impressive 400-horsepower from a 1.5-liter three-cylinder Rotax is actually quite regularly accomplished, so we wonder if RIVA will start offering completely outfitted packages similar to this sick machine. RIVA’s no ingenue to turbo kits, as this package isn’t too far removed from the turbo RXP-X RIVA showcased at the 2012 IJSBA World Finals. Where is this particular ski? Was it bought up? Are there more of these on the water? We demand answers!

IJSBA Homologates 2014 Sea-Doo Spark

0

OK, here’s one that we’re not too sure what to think of. First, it’s become pretty obvious that Sea-Doo isn’t exactly elated with the initial reception of the Spark – at least when it’s related to sales. While the Spark is selling and is generating absurd levels of attention from the PWC community, Sea-Doo was really hoping that it would be the misplaced Y-generation millennials snatching up the first rounds of Sparks.

Here’s the problem: millennials are broke. They live with their parents until they’re 30. Most would rather own a new iPad than a car. Heck, they can’t even afford the “Affordable Health Care” they voted for. They’re drowning in school loans (that Bachelor of Arts focusing on early 20th Century Expatriate American Authors isn’t cheap). Oh, and consequently, their credit scores are abysmally low, meaning they can’t get OK’ed for financing through BRP.

DERP!

So who’s buying up the Sparks? Dudes in their 40’s and 50’s who have been jonesin’ for a new mini-runabout that rides like their old WaveBlaster from 20-years-ago (y’know, back when they had hair and that Scorpions cassette in their Pontiac Fiero could actually get them laid). Videos of 40-somethings rallying Sparks in the surf or attempting old freestyle tricks they mastered on their XP have already hit the intarwebs.

But this isn’t a surprise. In fact, we called this a while ago. And it comes as no shock that the Spark has been OK’ed for use in IJSBA race events although Sea-Doo designed the Spark for strictly recreational use. The plastic hull can’t take the forces imposed by excessive speeds, the impact of “rubbing rails” in the turns or equipped with the intake and pump combo to be a true buoy course killer. That’s what the RXT and RXPs are for.

Buy hey, people are excited to hot rod the Spark and that’s good news.

Here’s the official release:

IJSBA is pleased to announce that the Sea-Doo Spark has met homologation standards for both worldwide competition and United States-based competition. Effective immediately, the Sea-Doo Spark may be used in any IJSBA approved competition class in which the Spark is eligible.

Note: The Spark 2Up and 3Up are be considered separate models despite being listed as the same PWC with different seating options. Parts that solely appear on the 2Up will not necessarily be legal to exchange with the 3Up and vice versa. The High Output option is considered the same model as units outfitted with the standard 900 ACE engine.

It is the responsibility of the competitor to determine whether any options selected for the Sea-Doo Spark are consistent with permitted accessories in the IJSBA Rule Book.

For questions about this notice, or about IJSBA homologation policies, please email: [email protected].

Introducing Champion Timepieces From Ross Champion

0

When people reminisce to the heydays of jet skiing’s height of popularity, being the late ’80s through the mid-1990s, much of the their grievance with today’s slump is – among slowed sales, a drastic decline in racing and recreational riding venues, and the like – often associated with jet skiing once having a look, a feel and a spirit.

The iridescent pinks, yellows and greens, the wrap-around Oakleys and the low-cut tank tops and high-cut shorts that once embodied the jet ski life has gone the way of the dodo. And that’s OK. It’s not an embarrassment or something to be ashamed of. But today, the look of a jet skier is less “river rat” and more “soul surfer.”

The few helping to establish a new look to the sport are the freeriders – those jet skiers who spend their lives in the water, be it under throttle or paddling out on a long board. While some would want to steer the casual look of the sport closer to motocross, the freeriders and the companies they command are doing a far better job of marrying surfing’s soul into the sport. And we’re OK with that.

Last week, one of our favorite people on the planet – Ross Champion – announced the release of the much anticipated Champion Timepieces. A combined effort between the famed IFWA world champ and Cold-Fusion’s Carl Gramberg, the new watchmaker promises to provide the PWC community a quality waterman’s watch that will perform as good as it looks. We could ramble on, but it’s best we let you read the official release in Ross’ own words:

Carl Gramberg and I (Ross Champion) are extremely happy to finally be able to announce Champion Timepieces. Champion Timepieces is a watch company with a vision for building a brand strongly rooted in jet ski culture that will be shared with the world.

We have been working hard the past 13 months on developing the company’s first entry in to the world of watch making the “Fusion.” We are very proud to be able to announce this venture, along with the Fusion at this year’s Daytona Freeride.

If you are reading this, chances are our first model was made specifically for you. We created the Fusion to be an authentic representation of the culture that so much of our lives revolve around. To do that we use many of the same materials and manufacturing techniques in building the Fusion that have made our world of high performance watercraft what it is today.

The Fusion’s body (case) is meticulously machined from a block of 6061 t6 Billet Aluminum at our facility in Oxnard, California. To create the case we employ multiple processes using state of the art CNC equipment and fixtures before each individual case is hand polished and sent to anodizing.

This is the very same material and process used to create the beautiful Billet components that have helped take our sport to new heights.Using this material and manufacturing process really set Champion Timepieces apart from the rest of the watch industry.

We used a real carbon fiber face in the design of the Fusion as a nod to the incredible hull builders who picked up where the OEM’s left off and have literally helped the sports of freestyle and freeride reach a level that could not have been imagined in years past. Besides, for beauty it’s hard to beat raw carbon fiber and aluminum.

The band that secures the Fusion to the rider’s wrist gets it’s strength from the very same nylon webbing material that is used to make straps that help keep the hood in place on serious surf boats. But this band is something very unique and very special in the watch industry. Coming to us under special license from Reactor Watches the Fusion’s band uses nylon webbing for strength, but is co-molded with silicone rubber for comfort.

The Fusion’s name is symbolic of the partnership that was formed between Ross and Carl to bring this watch to life. It also pays homage to Carl’s brand Cold-Fusion through which he has made ground breaking Billet jet ski components for the past quarter century.

While Champion Timepieces is a partnership between Ross and Carl, the business is by no means a two man show.We are very fortunate to have a great team advising and helping us as we enter the world of horology. Carl’s long time friend Jerry Jacob was the founder and CEO of the iconic brand and watch company Freestyle until selling the business in 2000. Jerry and one of his partners in Freestyle, Jimmy Olmes (the founder and current CEO of Reactor Watches) have been kind enough to help us navigate the process of sourcing the best components and assembly possible for Champion Timepieces.

The vision for Champion Timepieces is pretty simple. We want to create bold, functional time keeping machines that are representative of the things in life we are most passionate about and reflect our values.We hope these watches will resonate with those that share our same feelings. And we will use the amazing machines, people and imagery that surrounds those passions to market our watches to a broad audience.

In so doing, we hope to be able to provide a positive impact on the athletes and sport that means so much to both of us.

With that in mind, I am very proud to be able to announce the Champion Freeride Team. Consisting of Randy Laine, Mike Serlin, Jake Montadon, Zack Bright, Mark Gomez, Darin Andersen, Jake Bright, Pete Mcafee, Ludo Mouveau, Carl Gramberg and Ross Champion; this team has been assembled to travel the globe in search of great waves and good times.Our first project is slated to begin filming mid February.

This dream, goal and vision is so close to becoming a reality. But we are not quite there yet. To make it all happen, we are humbly asking for your help. To date we have invested over a years worth of work many thousands of dollars, and have called in all kinds of personal favors to get where we are today. But we are still not quite there. All our our design, engineering, prototyping and testing has been done.

Component manufacturing is in process and our complete production samples will be back from the assembler later this month. But to get this business off the ground, we really need your help.

We need to have orders for 50 Fusions before we will be able to begin production on our run of 100 watches. Our website will go live on Jan 15th and we will release the first 10 serial numbers for sale at premium prices for those that would like to own a piece of history, and would like to go above and beyond in helping us turn this vision in to a reality.

The next 40 serial numbers will also be available to be ordered at our regular price of $350. Serial numbers 011 – 050 will be sold on a first come first serve basis.

As a special thank you, the first 50 Fusion’s will come with a custom engraved plaque in the watch box containing a personalized thank you note from Carl and myself. All of the Fusions will come with the serial number engraved on the box as well as the watch. When Fusion serial number 050 is ordered, production will begin and watches will be delivered within 60 days.

Thank you in advance for your support in helping us make this dream a reality. And if you are unable to buy a watch at this time, but believe in our vision, we would ask that you please share our message and help us get the word out.

Sincerely,
Ross Champion

Double Lung Transplant Teen to Repeat 1,250-Mile Ride

0
Coen Ashton looks to complete a near 1,250-mile journey aboard a PWC 15 months after his double lung transplant. Image: Liam Kidston. News Limited

People can do amazing things particularly in the face of daunting circumstances. Australian 16-year-old Coen Ashton, who was born with cystic fibrosis, received a cut-down pair of lungs in October, 2012. The decision to alter the donor lungs came after fearing Ashton might die before a suitable donor lungs would become available. Thankfully, a pair of donor lungs became available before Ashton’s condition deteriorated to the point that doctors would’ve resorted to putting him on life support.

Fifteen months after the operation in Melbourne, Ashton is preparing to repeat a 2000km (1,240-plus-miles) PWC ride up the Murray River in February to mark DonateLife week – three years after he first completed the feat. According to news.com.au, Ashton aims to finish the trip in seven days, instead of seven weeks.

“I want to show what a difference a transplant can make,” he said. “I can now laugh, run, walk for as long as I like. I can keep up with my mates and half of them, I can even beat.”

He continued, “Transplant isn’t a cure, but it’s a better life than what I had before. It’s 110 per cent improvement.”

Ashton encouraged more than 1,000 people to enlist into Australia’s organ donor registry during his previous Murray River adventure and hopes to double that this time.

“I want to get the message out that everyone can be a hero,” he said. “If you sign up to be an organ donor, you have the chance of saving up to nine lives. In my book, that counts as being a hero.”

His Murray River trip will begin on February 22, starting at Goolwa on the South Australian coast where he concluded his 2011 adventure. He hopes to finish in Yarrawonga, Victoria, on March 2.